![]() I re soldered all the Cold & Broken connections I could find and got it to work. It had Cold Solders and 2x were actually broken. I decided to take it apart and investigate. ![]() ![]() So, I bent it and that did the trick for about 20 seconds and then nothing again. No power when directly plugged into USB slot. My Main PCB for the Capture was also Broken. All 4 were Rotted/Corroded/Broken on one end of mine. With the USB pad/Tensor down and looking at the connector the wires from Right to Left were Red, White, Green, and Black for the order they were connected. I opened up each end of the cable and cut about a 1/2 inch off each end and re soldered them. USB extension cable that came with mine was dry rotted inside with broken wires on the end that the Capture itself would plug into and the insulation covering was almost powder at the connection ends. Thanks Matt, you saved me hours of hunting and trial & error looking for Drivers for my Win7 圆4.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |